RAR-Series and RAR506 Lightweight Hydraulic Cylinders are double-acting for rapid and controlled retraction. The tough aluminum construction means they’re lighter than steel equivalents and therefore offer improved portability.
Simplex Jacks & Cylinders
Rent or buy the Simplex RAR506, 50 ton Double-Acting, Aluminum Cylinders
CALL US on 866-522-5464 or Request A Quote Below
Simplex RAR506, 50 ton Capacity, 5.91 in Stroke, Double-Acting, Aluminum Hydraulic Cylinder
Model: RAR506 | Series: RAR | Product Line: Industrial Tools
RAR-Series Double Acting Hydraulic Cylinders provide a rapid and more controlled plunger retraction than spring return or load return types. The hydraulic return method continues to work effectively regardless of hose lengths and system losses, maintaining efficiency and productivity. Each RAR Cylinder is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.
The aluminum construction of RAR Cylinders means they are not only lightweight, but also less corrosive than steel equivalents. This helps to maintain durability in many caustic environments. For enhanced protection, RAR Aluminum Cylinders are finished with an anodized hard coat finish to resist damage and extend cylinder life. Handles featured on all models enhance their portability.
Each RAR Cylinder is equipped with a bolt-on hardened steel saddle and a steel base plate for increased durability. Optional Tilt Saddles can help to support the load evenly and alleviate unwanted side-load.
- Double-acting for rapid retraction, regardless of hose lengths and system losses
- Composite bearings increase cylinder life and side load resistance
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Handles included on all models
- Steel base plate and saddle for protection against load- induced damage
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- Built-in safety valve prevents accidental over-pressurization
LPL1002, 113 ton Capacity, 1.97 in Stroke, Low Height, Lock Nut Hydraulic Cylinder
LPL-Series are Low Profile Lock Nut Hydraulic Cylinders are single-acting, load return and include a lock nut to provide safe mechanical load holding for extended periods of time. All models are finished with a nitrocarburized coating for enhanced durability and corrosion protection in harsh working environments.
HCG1002, 113 ton Capacity, 1.97 in Stroke, Single-Acting, High Tonnage Hydraulic Cylinder
HCG Series Hydraulic Cylinders are the single-acting load return option from the industry-proven Enerpac high-tonnage range.
As with all of our high-tonnage cylinders, included are a multitude of special features inside and out, to deliver the increased levels of durability, safety, and performance vital for large-scale construction projects. Among these features are low-wear high pressure seals, replaceable composite plunger support bearings, and a tough nitrocarburized finish on the cylinder body and the plunger.
Related Products
Simplex RFS50, 50 ton Single-Acting, Low Height Hydraulic Cylinder
Product Model: RFS50 | Series: RFS | Product Line: Hydraulic ToolsSimplex RFS Se...
18348, Cylinder Load Cap for R10, R15 & RDA10 Cylinders
The Simplex 18348 Cylinder Load Cap is designed for R10, R15, and RDA10 cylinder...
Simplex RCD1505, 150 ton Capacity, 5 in Stroke, Double Acting, Center Hole Hydraulic Cylinder
The Simplex RCD1505 is a 150-ton (1334.5 kN) capacity, double-acting center hole...
Simplex RCD10010A, 103 ton Capacity, 10.1 in Stroke, Double Acting, Center Hole Hydraulic Cylinder
The Simplex RCD10010A is a 103-ton (916.3 kN) capacity, double-acting center hol...
Simplex RCD1006A, 103 ton Capacity, 6 in (152,4 mm) Stroke, Double-Acting, Center Hole Hydraulic Cylinder
The Simplex RCD1006A is a 103-ton (916.3 kN) capacity, double-acting center hole...
Simplex RCD1003A, 103 ton Capacity, 3 in Stroke, Double Acting, Center Hole Hydraulic Cylinder
The Simplex RCD1003A is a 103-ton (916.3 kN) capacity, double-acting center hole...
Simplex RCD6010, 64 ton Capacity, 10.12 in Stroke, Double Acting, Center Hole Hydraulic Cylinder
The Simplex RCD6010 is a 64-ton capacity, double-acting center hole hydraulic cy...
Related Articles
RELATED Articles
Comprehensive Guide to Simplex Hydraulic Jacks and Cylinders: Tonnage Capacities, Industrial Applications, and Pressure Requirements.
Simplex hydraulic jacks and cylinders provide reliable and powerful lifting solu...
SIMPLEX
Hydraulic Jacks
SIMPLEX
SIMPLEX
Hydraulic Pumps
SIMPLEX
SIMPLEX
Hydraulic Cylinders
SIMPLEX
SIMPLEX
Hydraulic Tools
SIMPLEX
- Tool Sets
- Hydraulic Presses
- Hydraulic Spreaders
- Cylinder and Pump Sets
- Hydraulic Punches
- Maintenance Sets
- System Components
WB EQUIPMENT
Hydraulic Tools
WB EQUIPMENT
Other Suppliers
Other Suppliers
SALES RENTALS SERVICE
SALES RENTALS SERVICE
SALES RENTALS SERVICE
SALES RENTALS SERVICE
SALES RENTALS SERVICE
